Returning Customer
I am a returning customer
Register Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Congratulations! Your new account has been successfully created!
You can now take advantage of member privileges to enhance your online shopping experience with us.
If you have ANY questions about the operation of this online shop, please e-mail the store owner.
A confirmation has been sent to the provided e-mail address. If you have not received it within the hour, please contact us.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
CS350M EIS Potentiostat/Galvanostat is available from LABERA.UZ for laboratory, testing, medical and industrial applications in Uzbekistan.
Contact LABERA.UZ for specifications, pricing, lead time and a commercial quotation.
| Technical Specifications | |
| 2nd harmonica A.K. Voltamperometry (SHACV): * | * |
| EIS vs. time (IMPT): * | * |
| EIS vs. Potential (IMPE) (Mott-Schottky): * | * |
| EIS versus frequency (IMP) | * |
| Zero resistance ammeter (ZRA): * | * |
| Amperometry: Differential Pulsed Amperometry (DPA) | * |
| AC Voltamperometry (ACV): * | * |
| Voltamperometry of rectangular wave (SWV): * | * |
| Voltamperometry with linear sweep (LSV)(i-v): * | * |
| Voltamperometry: Cyclical Voltamperometry (CV) | * |
| Increase time: <1 μs (<10 mA), <10 μs (<2 A) | Input resistance of the comparison electrode: 1012 Ohm |20 pF |
| Built-in amperometric pulse detection system (IPAD) | * |
| Galvanic Step Staircase (ISTEP): * | * |
| Galvanodynamics: | * |
| Galvanostatic EI: * | * |
| Galvanostatic EIS vs. time: * | * |
| Galvanostatic charge and discharge (BPD): * | * |
| Galvanostatic: | * |
| Double differential pulse amperometry (DDPA): | * |
| Range of automatic potential compensation: -10 V ~ + 10 V | Current compensation range: -1A~+1A |
| Capacity control range: ± 10 V | Current control range: ± 2 A |
| Current range: 2 nA ~ 2 A, 10 ranges | Compliance voltage: ± 21 V |
| Frequency range: 10 μHz ~ 1 MHz | AC amplitude: 0.1 mV ~ 2,500 mV |
| Differential pulse voltamperometry (DPV): * | * |
| Differential Normal Pulsed Voltamperometry (DNPV): | * |
| Integral time: minimum: 10 ms or longest cycle time | Maximum: 106 cycles or 105 seconds |
| Corrosion test: The cyclic polarization curve (CPP) | * |
| Linear polarization curve (LPR): * | * |
| Ladder Voltamperometry (SCV): * | * |
| Maximum output current: 2A | CV and LSV scanning speed: 0.001 mV ~ 10,000 V/s |
| The method of galvanostatic intermittent titration (GITT): * | * |
| Methods: With EIS | CS 350M |
| Multi-precision steps: * | * |
| Normal pulse voltamperometry (NPV): * | * |
| Operating system: Windows 7/8/10/11 | Interface: USB 2. 0 |
| Transitional polarization: Multipotential steps | * |
| Support for 2-, 3- or 4-electrode systems | Range of potential and current: Automatic |
| Potential ladder step (VSTEP): * | * |
| Potential increment during scanning: 0.076mV@1V/ms | SWV frequency: 0.001 ~ 100 kHz |
| Potential resolution: 10 μV (>100 Hz), 3 μV (<10 Hz) | Current sensitivity: 1 PA |
| Potentiodynamics (Taffel story): * | * |
| Potentiostatic Charging and Discharge (PCD): * | * |
| Potentiostatic (i-t curve): * | * |
| Potentiostatic Intermittent Titration Method (PITT): * | * |
| DA resolution: 16 bits, installation time: 1 μs | Minimum capacity increase in CV: 0.075 mV |
| Direct current displacement: -10 ~ + 10 V | Output resistance: 50 ohms |
| Stable polarization: Idle Potential (OCP) | * |
| Battery test: Battery charge and discharge | * |
| Capacity control accuracy: 0.1% × full range ± 1 mV | Accuracy of current control: 0.1% × full range |
| Triple pulse amperometry (TPA): * | * |
| Wave shape: sine wave, triangular wave and rectangular wave | Wave distortion: <1% |
| Chronoamperometry (CA): * | * |
| Chronoculometry (CC): * | * |
| Chronological methods: Chronopotentiometry (CP) | * |
| IMP frequency: 10 μHz ~ 1 MHz | Lower Frequency Filters: 8 Decades |
| CA and CC pulse width: 0.0001 ~ 65,000 s | Current step during scanning: 1mA@1A/ms |
| Pulse width of DPV and NPV: 0.0001 ~ 1000 s | AD data collection: 16bit@1 MHz, 20bit@1 kHz |
| Electrochemical powerful iokinetic reactivation (EPR): * | * |
| Electrochemical noise (EN): * | * |